TRIOMED CGI-3 (the manual)
14
The device is switched on by pressing the control button. While the
button is kept pressed, the programmes no.1 and 2 are selected in turn
as indicated by the switching on of one or two LEDs for approx. 2 seconds
(Fig. 3 - 5). If the control button is not released, the programme switching
cycle is repeated. The release of the button during the indication of a
particular programme activates this programme. MM EMR will switch on.
To confirm that the device is working in accordance with the selected
programme, the corresponding LEDs on the front panel are switched
on (Fig. 3 - 5) and a sound signal is produced briefly at certain intervals
(3-4 sec). To use the device in the mute mode, keep the control button
pressed after completion of the first programme selection cycle. Wait
for the LED combination selected earlier and release the control button.
The device is programmed to switch on the sound in every other pro-
gramme selection cycle. Having finished its operation according to the
selected programme the device switches off automatically. The device
can be switched offat any time by pressing the control button.
