6
Телефон для связи:
Почта:
Сайт:
+7 (495) 772-62-62
www.trioma.ru
Applications
1. Special mode for BMW
If you want to change the volume levels of parking sensors and system messages, you
should use an additional mode of the adapter
To set the desired volume of the parking sensors and signals:
1)
set the jumpers to position BMW (one jumper).
2)
turn on the system.
3)
not turning off the system, add a jumper (position "BMW spec.mode (park)").
4)
adjust the level of the lower border signals by adjusting low frequency timbres.
Below this situation, the signal level will not drop ever.
5)
install attenuation additional signals relative to the level of the main channel by
adjusting the timbres of the upper frequency (weakening of the signal levels of the
parking sensors and of the system with respect to the main music signal).
6)
Turn off the system. Wait until the car "fall asleep".
7)
Operation with the set parameters is possible if the position of jumpers "BMW
spec.mode (park)". To return to the default settings again, set the jumpers to the
normal position "BMW"
2. General specifications
Dimensions adapter:
90 х 60 х 25 mm
Power supply voltage:
8 ... 16 volts
Current consumption in sleep mode:
less than 0.5 mA
Digital output:
SPDIF / TosLink
The number of bands equalizer:
5 bands
EQ adjustments Depth:
+/- 15db
Depth adjustment of bass and treble:
+/- 12db
3. Characteristics of the sound processor (STA309A)
Bit Sound Processor:
24 bit
Dynamic range:
no less than 100 db
Number of active channels concurrently:
5 channels (1-stereo and 4-mono)