LCD DISPLAY
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ENABLE
Display at start-up
Display with WDOG on
The IP address and subnet mask of the MC508 is shown on the LCD
display for a few seconds after power-up. The factory default IP
address is 192.168.0.250. This can be changed using the ETHERNET
or the
IP _ ADDRESS
command via Motion Perfect.
Good quality screened cables should be used for the serial ports. The serial ports and
CANbus port are not galvanically isolated, therefore the 0V return MUST be connected to all
peripheral devices. In addition, bond together the 0V (24V return) terminals of all system
components so as to minimise current fl owing in the serial cables.
Serial cable RS485
Serial cable RS232
