Trinity TWE-1101 User Manual Download Page 2

TRINITY 

ALL-PURPOSE CHROME SWIVEL STOOL

Model 

TWE-1101

We warrant to the original consumer purchaser (“Purchaser”) of the TRINITY 

All-Purpose Chrome Swivel Stool (“Product”) that each Product shall be free from 

defects in workmanship and materials for a period of 90 days from the date of original 

purchase.  Our obligation under this warranty shall be limited to repair or replacement 

of, or adequate compensation for, the Product, at the option of us, during the warranty 

period.  Our liability shall not extend beyond repair or replacement, or the cost equiva-

lent thereto.

This warranty excludes normal wear and tear of the Product and its parts or compo-

nents, and damage arising from any of the following: negligent use or misuse of the 

Product, use contrary to this User’s Manual, or alteration by any one other than us.  The 

warranty period of 90 days shall not be extended or renewed by the repair or replace-

ment of, or compensation for, the Product.

If your Product is defective or otherwise requires service or parts, please first call 

TRINITY Customer Service toll-free at (800) 985-5506, between 8:00 a.m. and 5:00 

p.m., PST. Please tell us which model you purchased, the date of purchase, and the 

problem with your Product.  We will use our very best efforts to honor this warranty, and 

repair, replace or compensate you for your Product through your original place of 

purchase.  A copy of your original purchase receipt must accompany your service 

request.

LIMITATION OF REMEDIES AND LIABILITY

We shall not be liable for any incidental or consequential damages for breach of any 

express or implied warranty on its Product.  Except to the extent prohibited by appli-

cable law, any implied warranty or merchantability or fitness for a particular purpose on 

this Product shall be limited to the duration of the above warranty.  Neither us nor 

anyone else who has been involved in the creation, production, or delivery of the 

Product shall be liable for damages of any type, including but not limited to any lost 

profits, lost savings, loss of anticipated benefits, or other incidental or consequential 

damages which may arise out of the purchase, use, or inability to use the Product, 

whether arising out of contract, negligence, strict tort, or under any warranty, or other-

wise, even if you have been advised of the possibility of such damage or any other 

claim by any other party.  Our liability for any breach of warranty shall be limited to 

repair or replacement of the defective part or parts as described above.  Some states 

do not allow the exclusion or limitation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you.  The above warranty gives you 

specific legal rights, and you may have other rights which vary from state to state.

LIMITED WARRANTY

M

J

I

A

L

R

S

H

B

J

I

G

G

E

F

D

C

G

A

1.  Put 

A

 on top of 

B

, and fasten with 

G

 from the top and 

J

 and 

I

 from the 

bottom.

2.  Once Legs 

(A + B)

 are secure, 

turn the legs upside down, and 

hammer in the Feet 

(C)

.  Screw in 

Feet Levelers 

(D)

 into the Feet 

(C)

.

3.  Turn the legs right side up.  Place 

the Large Ring 

(E)

 around 

A+B

, and 

slide into place.  Match up the holes, 

and screw with 

G

 on the inside and 

H

 

on the outside.  Tighten.

4.  Place Small Ring 

(F)

 on the inside 

of the legs.  You may need to tilt ot fit 

into space.  Match 

F

 with the holes 

on the legs, and screw in with 

G

.  

Tighten.

5.  Take out the baseplate 

(K)

, and 

turn the top so that the top and 

bottom are at a 45 degree angle (see 

picture ).    Make sure to put 

K

 on the 

legs first.  Insert 

between 

K

 and 

the legs.  Screw with 

L

 from the top, 

and 

J

 and 

I

 from the bottom.

6.  Screw the Rim 

(O)

 to the Seat 

(N)

 

with 

P

.  Make sure the Ring is 

centered to the Seat.

7.  Lay the seat on the ground, and 

attach the legs while stool is upside 

down. Screw the Base Plate 

(K)

 to 

the Seat 

(N)

 with 

(Q)

.

8.  Ensure all screws are tightened.

Step 1

Step 2

Step 6

Step 5

Step 7

Step 4

Step 3

O

P

N

Q

Reviews: