USAGE INSTRUCTIONS
DRAWER REMOVAL
DRAWER REPLACEMENT
Pull the drawer out so that it is almost fully
extended. On the RIGHT-hand side, pull the
black release lever UP. On the LEFT-hand side,
push the black release lever DOWN. While
holding the levers as instructed, pull the
drawer forward until released from the slides
attached to the Workbench (“Workbench
Slides”).
Note:
The slides attached to the drawer
(“Drawer Slides”) are an integral part of the
drawer and must be removed along with the
drawer itself.
To replace the drawer, pull the slides out completely. Insert the brackets on each side of the Drawer
Slides into the corresponding slots on the Workbench Slides, making sure they are properly positioned.
Once the brackets are inserted into the slots, completely close the drawer to set all slides in their
proper positions.
© 2021 TRINITY - 800.985.5506
4
SHELF ADJUSTMENT
Ensure all products have been removed
from the shelf.
To adjust the shelf height position, tap
the underside of the shelf, starting on
the right side. Disengage the shelf from
the front and back cabinet tabs first
from the right side and then from the
left.
Tilt the shelf diagonally to move it to the
desired position. Once at the desired
height, secure the shelf by pushing down
on all 4 corners until the shelf engages
fully with the tabs.
Position Tab
Summary of Contents for TLS-7204
Page 10: ... 2021 TRINITY 800 985 5506 9 ...
