Trinity TIJPBA-0904, Owner'S Manual

Page: 3 / 12

© 2019 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
Stationary Option
Screw each FEET LEVELER (G) into bottom of each
BOTTOM POLE (A). Turn clockwise to screw in place.
Mobile Option
Screw each CASTER (E) into bottom of each BOTTOM
POLE (A). Turn clockwise to screw in place. Make sure
Locking Casters are on the same side.
Use provided caster wrench to tighten completely.
Failure to do as instructed could result in caster stem
breaking.
For easiest assembly, do not attach TOP POLES(B) and BOTTOM
POLES(A) until instructed. Once connected, these will be posts
for the rack.
Note that POLES (A+B) has slight horizontal line indentations at
1” intervals. Each SLIP SLEEVE (D) has raised horizontal lines
inside designed to lock them in place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D) at the
desired height
no higher than 3
rd
indentation from the bottom.
Please make sure arrow faces up and word “TOP” is right side
up.
Slide pair of SLIP SLEEVES (D) until you hear a click to confirm
the pair is locked onto BOTTOM POLE (A). DO NOT place more
than one pair on each BOTTOM POLE (A) at a time. Do this for
each BOTTOM POLE (A) and make sure height is identical for
each BOTTOM POLE (A).
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
STEP 1
STEP 2
A (4) E (4) G (4)
A (4)
D (8)
A
D
A
A
G
E
F (1)
F