ASSEMBLY INSTRUCTIONS
Unscrew and remove the Lock Nut and Black
Gasket from the bottom of FAUCET
ASSEMBLY (C).
Insert Faucet through the White Gasket and
the hole on SINK (A) ledge from the top side
of SINK (A). Orient the Faucet handle toward
the front. From under SINK (A), first slide on
the Black Gasket then screw on the Lock Nut.
Tighten the Lock Nut completely. If necessary
use a pipe wrench to tighten.
STEP 3
C (1)
C
On top of
the sink
Under
the sink
Faucet
White
Gasket
Black
Gasket
Lock Nut
Carefully move the sink against wall at your
desired location. If needed, use a pencil to mark
off the mounting height of BRACKET (G).
Position BRACKET (G) to the wall, mark off the
fastening location on the wall through the holes
on BRACKET (G). Drill holes in marked locations.
Insert ANCHOR (I) completely into each drilled
hole. Fasten MOUNTING SCREWS (H) through
these holes into the wall or anchors tightly with
a screwdriver.
Slightly lift the sink and hook the flange of the
sink over the bracket. Adjust FEET LEVELERS to
ensure sink is stable and level.
Connect the HOSES and DRAIN to plumbing
system.
STEP 4
G (1)
H (2)
I (2)
G
H
I
flange
G
© 2018 TRINITY - 800.985.5506
3
Faucet Assembly (C)