Trinity TBFPB-0933, Owner'S Manual, Page: 3 / 12

B (4)
ASSEMBLY INSTRUCTIONS
B (4) D (8)
E (4) F (4)
Stationary Option
Screw each FEET LEVELER (F) into the bottom of each
BOTTOM POLE (B). Turn clockwise to screw in place.
Warning: For safety, at least half of the FEET LEVELER (F)
stem must be screwed into BOTTOM POLE (B).
Mobile Option
Screw each CASTER (E) into the bottom of each BOTTOM
POLE (B). Turn clockwise to screw in place. Make sure
the locking casters are on the same side.
Use the provided caster wrench to tighten completely.
Failure to do as instructed could result in the caster stem
breaking.
STEP 1
For easiest assembly, do not attach TOP (A) and BOTTOM
(B) POLES until instructed. Once connected, these will be
the posts for the rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on POLE (A+B).
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at
the desired level no higher than the 3
rd
indentation from
the bottom. Please make sure the arrow faces up and
that the word “TOP” is right side up. Do this for each
BOTTOM POLE (B) and make sure that the heights are
identical for BOTTOM POLE (B).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (B). DO
NOT place more than one pair on each POLE (B) at a time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
STEP 2
© 2018 TRINITY - 800.985.5506
2