Trinity TBFPB-0916, Owner'S Manual, Page: 3 / 12

ASSEMBLY INSTRUCTIONS
STEP 1
A (4) D (8)
For easiest assembly, do not attach TOP POLES (B) and BOTTOM POLES
(A) until instructed. Once connected, these will be posts for the rack.
Note that POLES (A+B) have slight horizontal line indentations at 1”
intervals. Each SLIP SLEEVE (D) has raised horizontal lines inside
designed to lock them in place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D) at desired
height no higher than 3rd indentation from bottom. Make sure arrow
faces up and word “TOP” is right side up.
Slide pair of SLIP SLEEVES (D) until you hear a click to confirm the pair
is locked onto BOTTOM POLE (A). Do this for each BOTTOM POLE (A)
and make sure height is identical for each BOTTOM POLE (A). Do NOT
place more than one pair on each pole at a time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.
A
D
STEP 2
C (1) Place SHELF (C) on its side and slide each BOTTOM
POLE (A) through each corner cylinder on SHELF (C).
Make sure SHELF (C) corner cylinders are positioned
over SLIP SLEEVES (D).
Stand the unit upright.
Note:
• Level side of SHELF (C) is TOP side (TRINITY logo on
corner cylinders should be right-side up.)
•
Use a rubber mallet, if needed, to secure SHELF (C).
C
A
© 2021 TRINITY - 800.985.5506
2