ASSEMBLY INSTRUCTIONS
STEP 2
H (1)
K (7)
F (1)
D(1)
© 2020 TRINITY - 800.985.5506
L (1)
Flip over completed assembly from STEP 1 and lay on
ground as shown.
Orient (2) insert nuts on RIGHT SUPPORT (H) to align
with (2) holes on SEAT (A). Insert (2) SCREWS (K),
from inside, through SEAT (A) and hand fasten to
RIGHT SUPPORT (H). Then with HEX KEY (L) tighten (2)
SCREWS (K).
Orient (3) insert nuts on RIGHT FRONT LEG (F) to align
with (3) holes on SEAT (A). Insert (3) SCREWS (K),
from inside, through SEAT (A) and hand fasten to
RIGHT FRONT LEG (F). Then with HEX KEY (L) tighten
(3) SCREWS (K).
Put RIGHT ARMREST (D) on RIGHT FRONT LEG (F) and
RIGHT SUPPORT (H) ,making sure holes are aligned
with insert nuts. Insert SCREW (K) through RIGHT
ARMREST (D) and hand fasten to RIGHT SUPPORT (H).
Insert SCREW (K) through RIGHT ARMREST (D) and
hand fasten to RIGHT FRONT LEG (F). Finally tighten
both SCREWS (K) with HEX KEY (L).
Seat Assembly after STEP 2
F
H
3
K
L
D
1
2
3
K
K