© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
A (4)
I (8)
STEP 1
STEP 2
Screw each CASTER (J & K) into bottom of each
BOTTOM POLE (A). Turn clockwise to screw in
place. Make sure LOCKING CASTERS are on the
same side.
Use provided caster wrench to tighten
completely. Failure to do as instructed could
result in caster stem breaking.
A (4)
K (2)
Note that POLES (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (I) has
raised horizontal lines inside designed to lock them in
place on POLES (A+B).
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (I) at
desired height
no higher than
3
rd
indentation from the
bottom. Please make sure arrow faces up and word
“TOP” is right
-side up. Do this for each BOTTOM POLE (A)
and make sure slip sleeve heights are identical for all
BOTTOM POLES (A).
Slide pair of SLIP SLEEVES (I) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). Do
NOT place more than one pair on each BOTTOM POLE (A)
at a time. Do this for each BOTTOM POLE (A) and make
sure height is identical for each BOTTOM POLE (A).
J (2)
L (1)
A
J
K
L
L
A
I
I
A
Note: There will be a very small gap in-between two locked SLIP SLEEVES (I)
—
this is normal.