This machine must be grounded.
If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with a cord having equipment
grounding conductor and grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
WARNING:
Improper connection of the equipment grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
***Warranty is voided by removal of grounding pin***
Extension Cord Usage Chart
Total Extension Cord Length (Feet)
Rating-Amps
25 50 75 100 125 150 175 200
0-10.0 18 18 16 16 14 14 12 12
10.1-13.0 16 16 14 14 14 12 12 12
13.1-15.0 12 12 12 12 12 12 12 –
GROUNDING INSTRUCTIONS
This appliance is for use on a nominal 120- Volt circuit, and has a grounded plug that
looks like the plug illustrated in
sketch A
above. A temporary adapter that looks like
the adapter illustrated in
sketch B
may be used to connect this plug to a 2-pole
receptacle as shown in
sketch B
if a properly grounded receptacle is not available.
The temporary adapter should be used only until a properly grounded outlet
sketch A
can be installed by a qualified electrician. The green colored ear, lug, or the like
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw.
NOTE:
In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
7
8
START UP:
Before starting your Trinity machine for the first time, you will need to be sure
the inverter box is set low (around 50) before you even turn your machine on.
1) Turn on the Trinity machine FIRST
2) Turn on the inverter
3) Slowly increase inverter speed until at desired level (50 - 80 is average
starting range but increase as needed depending on job).
TURN OFF INVERTER:
1) Turn speed down low (approx 50)
2) Turn off Trinity machine
WARNING!!
NEVER OPEN THE INVERTER BOX FOR ANY REASON!
DOING SO WILL VOID YOUR WARRANT
Y
Genesis KBAC Series Inverter
Power Status Button:
Green
- running fine
Red
- problem
**If your button is
red
, turn down speed.
It may be running too aggressive too
Quickly so back the machine down
until button turns green again.
Speed Control:
Controls the speed at which the motor
turns.
Momentary On/Off:
Machine will not start unless
this is on
INVERTER
A
B
