Trinity ACCUVAR User Manual Download Page 4

 
 pg. 4 

TRINITY 

 

 

ACCUVAR - Operational Manual 

 

 

What This Warranty Does Not Cover: 

 

This  warranty  does  not  apply  to  refurbished  or  reconditioned  products. 
This  warranty  covers  only  normal  use  in  India.  This  warranty  does  not 
cover  damage  to  the  Trinity  product  caused  by  parts  or  supplies  not 
manufactured,  distributed  or  certified  by  Trinity.  This  warranty  is  not 
transferable. This warranty does not cover third party parts, components 
or peripheral devices added to the Trinity product after its shipment from 
Trinity.  Trinity  is  not  responsible  for  warranty  service  should  the  Trinity 
label or logo or the rating label or serial number be removed or should the 
product fail to be properly maintained or fail to function properly as a result 
of  misuse,  abuse,  improper  installation,  neglect,  improper  shipping, 
damage caused by disasters such as fire, flood, and lightning, improper 
electrical  current,  interaction  with  non-Trinity  products,  or  service  other 
than by a Trinity Authorized Service. 
 
The warranty and remedy provided above are exclusive and in lieu of all 
other express or implied warranties including, but not limited to, the implied 
warranties  of  merchantability  or  fitness  for  a  particular  purpose.  In  the 
event, the remedies above fail, Trinity’s entire liability shall be limited to a 
refund  of  the  price  paid  for  the  Trinity  product  covered  by  this  limited 
warranty.  Except  as  provided  in  this  written  warranty,  neither  Trinity 
Energy  Systems  Pvt.  Ltd.  nor  its  affiliates  shall  be  liable  for  any  loss, 
inconvenience,  or  damage,  including  direct,  special,  incidental,  or 
consequential  damages,  resulting  from  the  use  or  inability  to  use  the 
Trinity  product,  whether  resulting  from  breach  of  warranty  or  any  other 
legal theory.

 

 
 
 
 
 

Summary of Contents for ACCUVAR




























Reviews: