TRINITY Pro TLSF-7211, Owner'S Manual

Page: 5 / 16

ASSEMBLY INSTRUCTIONS
STEP 3
E (1)
Place LINERS (G) inside each drawer and Cabinet.
STEP 4
E
F
G (11)
G
© 2020 TRINITY - 800.985.5506
3
F (4)
Carefully lift Workbench upright. Two people
are needed. Do NOT attempt this alone.
SHELF (E) is shipped inside the bottom cabinet.
Tilt SHELF (E) diagonally and remove it from
cabinet.
Attach SHELF SUPPORT (F) by hooking it over
position tab at desired height. Make sure all
four SHELF SUPPORTS (F) are at same level. Tilt
SHELF (E) diagonally to move it inside cabinet.
Place SHELF (E) on top of all four SHELF
SUPPORTS (F).
You can adjust shelf height position by
removing shelf, re-locating shelf supports and
replacing shelf.
Position Tab