background image

WARNINGS

1.

Read and understand all instructions.

Failure to follow all instructions may result in injury 

and/or damage.

2.

The warnings, cautions, and instructions discussed in this manual cannot cover all 
possible conditions or situations that may occur.

The user must always be aware of their 

environment and ensure that they use the product in a safe and responsible manner.

3.

Do NOT modify the product in any way.

Unauthorized modification may impair the 

function and/or safety of the product, and may affect the life of the product.

4.

Check for damaged parts.

Before using this product, carefully check that all parts are in 

good condition, and that the product will operate properly and perform its intended 
function. Check for damaged parts and any other conditions that may affect the operation 
of this product. Replace damaged or worn parts, and never use this product with a 
damaged part.

5.

Do NOT overload the product.

6.

Lock the casters when leaving workbench in stationary position.

7.

Lock the drawers before moving the workbench.

8.

Do NOT open more than one drawer at a time.  

Tipping can occur.

9.

Do NOT step or lean on open drawers

Tipping can occur.

10. Do NOT lift workbench by wood top.  

Wood top may separate causing injury.

11. Do NOT let children play near workbench.

12. Load the workbench starting with the bottom drawers to prevent workbench from 

tipping.

13. Make sure all drawers are closed tightly before locking or unlocking.

Weight capacity per drawer w/ 1 pair of slides

100 lb

Weight capacity per drawer w/ 2 pairs of slides

200 lb

Total weight capacity of workbench

2200 lb

© 2021 TRINITY - 800.985.5506

6

Summary of Contents for TLSF-7209













Reviews: