TRINITY Pro TIJPBA-0949, Owner'S Manual

Page: 3 / 12

© 2019 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
2
A (4) E (4)
Note that POLES (A+B) have slight horizontal line
indentations at 1” intervals. SLIP SLEEVES (D) have
raised horizontal lines inside designed to lock them in
place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES
(D) at desired height
no higher than 3 rd indentation
from the bottom. Please make sure arrow faces up
and word “TOP” is right side up.
Slide pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). DO
NOT place more than one pair on each POLE (A) at a
time. Do this for each BOTTOM POLE (A) and make
sure height is identical for each BOTTOM POLE (A).
For easiest assembly, do not attach TOP POLES
(B) and BOTTOM POLES (A) until instructed. Once
connected, these will be posts for the rack.
Screw each FEET LEVELER (E) into bottom of each
BOTTOM POLE (A). Turn clock-wise to screw in
place.
STEP 1
STEP 2
A (4)
D (8)
E
A
A
D