TrinityHighway.com
43
December 2021
STEP 16
CAT® Delineation
PARTS
INSTRUCTIONS
ZZ
3177B
2 EA
1. Attach the 18” x 18” [450 mm x 450 mm] Delineation Sheeting (Part ZZ) or
16” x 16” [400 mm x 400mm] Delineation Sheeting (Part A1) as shown
above for median/gore application.
2. For roadside/shoulder applications, rotate the sheeting.
Note:
Manufacturer suggests that user provide delineation (reflective sheeting)
as required by the state/specifying agency for terminals.
Trinity Highway offers two (2) specific reflective sheeting options for an
additional charge.
Trinity Highway makes no guarantees they meet the
minimum specifications, comply with MUTCD requirements or comply with
state/specifying agency requirements.
A1
6665B
2 EA
Use only Trinity Highway parts that
are specified herein for the CAT®
for assembling, maintaining, or
repairing the CAT®. Do not utilize
or otherwise commingle parts from
other systems even if those
systems are Trinity Highway
systems.
WARNINGS
Ensure delineation (reflective sheeting) used on the CAT® meets
state/specifying agency’s MUTCD for proper delineation.
Use of steel delineator posts must be a minimum of 3’-0” [1 m] in
front (upstream) of the CAT®. Failure to follow this warning could
result in serious injury or death in the event of a vehicle impact with
the system.
