TrinityHighway.com
13
Revision A November 2021
Recommended Tools
Documentation
•
Manufacturer’s
C
ASS
®
CA
ble
S
afety
S
ystem
Assembly Manual
(Current Version).
•
CASS
®
System Drawing(s). Current version of SS-720
Personal Protective Equipment (PPE)
•
Eye Protection
•
Work Gloves
•
Back Protection
•
Safety-Toe Shoes
•
Reflective Vest
•
Apron
Wrenches
•
Pipe Wrenches
•
Adjustable Spanner
•
Adjustable Jaw Wrenches
•
Imperial and Metric Wrenches
Concrete equipment
•
Concrete Vibrator
•
Concrete Tools
Cable/Miscellaneous equipment
•
Traffic Control Equipment and Plan per local standards and the MUTCD
•
Cable Tension Meter (PN-5878B)
•
CASS
®
Thermometer (Infrared) (PN-5709B)
•
Abrasive Cutoff Blade/Saw
•
C-Clamps
•
CASS
®
Cable Pulling Tool (PN-5850B)
•
Locking Pliers
•
Duct tape
•
Pry Bars
•
Line/String
•
Plumb Line
•
Straight Edge
•
Level
•
Drift Pin
•
Tape Measure
•
Come-along/Lever chain hoist (3 ton minimum capacity)
•
Backhoe (optional tensioning device)
•
Chain (5 ton minimum capacity) of appropriate length for tensioning equipment
•
Marking Paint
•
Post Pounder
•
Auger
Note: The provided list of tools is a general recommendation and should not be considered
an extensive list. Depending on specific site conditions and the complexity of the
assembly specified by the appropriate state/specifying agency, the required tools may
vary. Decisions as to what tools are needed to perform the job are entirely the
responsibility of the state/specifying agency and the agency’s contractor performing the
assembly of the system at the agency’s specified assembly site.
