STEP
4
STEP
3
STEP
5
STEP
6
INSTALL INTERIOR
ASSEMBLY
MOUNTING SCREWS AND
LATCH FACE.
INSTALL EXTERIOR
PULL
DOOR SCREWS.
USE LEVEL OR MEASURE FROM
DOOR EDGE TO ALIGN INTERIOR
ASSEMBLY
AND
EXTERIOR P
ULL
.
DOOR
EDGE
INSTALL INDICATOR WITH
LEFT OR
RIGHT DECAL, DEPENDING
ON
DOOR HANDING.
INSTALL EXTERIOR P
ULL
LO
O
SELY TO INTERIOR
ASSEMBLY
STUDS. (DO NOT
TIGHTEN
UNTIL PLATES ARE
ALIGNED
TO DOOR).
INSTALL INTERIOR
ASSEMBLY
(STUDS
THROUGH CARRIER).
CHOOSE THE CORRECT DECAL
LEFT AND RIGHT HANDED
DECALS ARE PROVIDED.
PRO TIP
: USE TAPE TO HOLD
ASSEMBLY
IN PLACE WHILE THE
EXTERIOR IS BEING INSTALLED.
PRO TIP:
TO INSURE PROPER FUNTION LATCH PLATE
AND STRIKE MUST BE PROPERLY ALIGNED.
PRO TIP:
EXTEND LATCH BOLT WHEN TIGHENING
OUTER PLATES TO DOOR SURFACE. THIS
HELPS INSURE ALIGNMENT.
INSTALLATION GUIDE# 22026
PAGE 2 OF 2
DATE: 10/07/2021 REV: 02
Always refer to WWW.TRIMCOHARDWARE.COM for the latest documentation
