TriMark 24324-02, Installation Instructions Manual

Page: 7 / 32

Standard e-
PAD
Operation and Features
The e-
PAD
is shipped with default
Authority
and
Access Codes
. If the
OEM or dealer has not changed the default codes, the
Authority
and
Access Codes
are:
Access code:
Authority code:
Locking Doors With Keypad
Press and hold down the (1 / 2) button for 1-2 seconds.
An
Access Code
is not needed to lock the doors.
Secure Operations
Entering a valid 5-digit
Access Code
provides a double-beep and
enables a secure operation. After entering an
Access Code
, the
keypad is enabled for 5 seconds and the next button pressed initiates
a secure operation, such as unlocking the doors.
Notes:

The
Authority Code
does not allow for secure operations. It is
only used to assign access codes (see page 12 for information
on setting access codes).

If an unassigned button is pressed, or no button is pressed,
within 5 seconds of a correctly entered
Access Code
, the
keypad reverts back to disabled state.

If the keypad does not Double-beep after the 5th digit of your
entered
Access Code
, then you have not entered the correct
Access Code
.

The secure keypad operations are set depending on the system
configuration. See page 6 for more information.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7 / 8 7 / 8 7 / 8 7 / 8 7 / 8
4