Trilux LiveLink LightGrid, Instruction Manual

Page: 3 / 51

3
INTRODUCTION
1 INTRODUCTION
1.1 SAFETY INFORMATION
• Commissioning (electrical) must only be carried out by an elec-
trician.
• Work with electrical devices must only be carried out with discon-
nected power supply.
• Valid safety and accident prevention regulations must be adhered
to.
• For assembly, also observe the corresponding assembly steps
from the assembly instructions of the components used.
• LiveLink LightGrid is not intended for any application other than
those specified here. Other applications are considered improper.
If LiveLink is used improperly, safe operation is not guaranteed.
1.2 BASIC FUNCTIONS
LiveLink LightGrid is a light management system with which Trilux
Smart Connect luminaires (identified by "SMC") can be interconnected
and controlled. In addition, the wired ceiling lighting can be integrated
by means of a ceiling controller. The luminaires can be individually con-
figured with the LiveLink LightGrid app. Automatic or semi-automatic control for optimum lighting quality and
efficiency can be implemented by using push-buttons, touch panels or
scenes.
Integration into an existing DALI network is possible.
1.3 SYSTEM OVERVIEW
The TRILUX LiveLink LightGrid light management system is based on
a Bluetooth network that can interconnect Smart Connect luminaires.
Optionally, the ceiling lighting can also be integrated.
Smart Connect luminaires require a power supply of 230V in order to
establish a Bluetooth network and to be recognised in the system. Up
to 12 wireless devices can be integrated into this network. In addition to
these luminaires, up to 32 DALI luminaires and two push-buttons can
be integrated via a ceiling controller.
As well as the DALI control elements and operating elements, Blue-
tooth push-buttons and Bluetooth touch panels can also be integrated.
For the given installation, all wireless components that are combined
in the Bluetooth network serve as the control unit. This allows flexible
access via app, as there is no central control unit.
A Bluetooth-enabled smartphone or tablet is required for commission-
ing.