Page 79 of 121
Trilogy Communications
Mentor RG
13.3
T
IMECODE
|
SDI
Once the software feature has been enabled, an extra item, Timecode, is shown in the side bar
menu for each SDI output.
13.3.1
DVITC mode
The factory default mode for DVITC is “Off”. DVITC is only available with standard definition SDI
outputs.
13.3.2
ATC sub-menu
The factory default mode for ATC is “Off”. ATC is available with both standard and high definition SDI
outputs.
•
ATC Coding
:
•
ATC Line
: were the ATC data to be re-encoded as a VITC signal, it would appear on the line
number defined here. Default is line 10.
13.3.3
On-screen Timecode Display
The following SDI outputs are capable of displaying on-screen timecode:
•
Main unit
•
360-20-00 HD/3G SDI Expansion module
Once enabled, the on-screen timecode position may be set to each of the four corners of the screen
(top left, top right, bottom left or bottom right) using the “Position” menu.