Trillium ROTO-JET VSR 175, Disassembly-Assembly Manual

Page: 5 / 53

VSR 175 2
2. DISASSEMBLY/ASSEMBLY REFERENCE INFORMATION
2.1 GENERAL
The following are recommended dismantling and assembly instructions for your Roto-Jet
pump. We urge that the instructions be read thoroughly before attempting to dismantle the
unit. The component parts must be handled with care during the dismantling and assembly
process. The work area should be clean and be equipped with the required tools.
Depending on the accessibility of the pump and the extent of the repair or inspection
required, the pump can be dismantled in place on its foundation. However, to facilitate the
disassembly procedure, it is recommended that the pump be removed from its foundation
and placed securely into a position in which the pump shaft is pointed vertical and the
manifold is facing upward. Roto-Jet pumps offers assembly stands for mounting the unit
during disassembly and assembly.
2.2 RECOMMENDED TOOLS
Table 1: Recomended Tools
DESCRIPTION QTY.
PART
NUMBERS
SPECIAL TOOLS
Special Tools Kit (Includes all the special tools below) 1 06P661210-006
Alignment Tool – Endbell 3 0661975
Center Guide & Puller – Pick-up Tube 1 0665285
Measuring Bar (For Shimming) 1 060580635
Lifting Ring, 3x2 Manifold 1 060580638
Pin, Alignment-Rotor Cover 2 0665014
Tool Box – 32” x 8-1/2” x 9” 1 060095050
Adapter, Torque Wrench-F/Bearing Locknut 65mm 1 0665931
Adapter, Torque Wrench –F/Bearing Locknut 80mm 1 0665930
Adapter, Torque Wrench-F/Bearing Locknut 95mm 1 0665929
Adapter, Torque Wrench-F/Bearing Locknut 140mm 1 0665920
Wrench, Pick-up Tube Nut 1 0665582-01
Balance Plug 1 0665081
Pin, Alignment-Manifold 2 0665030
PURCHASED TOOLS
Purchased Tools Kit (Includes all the purchased tools below) 1 06P661210-007
Eyebolt – 1/2” – 13 x 1-1/2” Lg. Shank 3 060055411
Eyebolt – 3/4”-10x3” Lg. Shank 2 0665772
Eyebolt – 7/16” – 14x4-1/2” Lg. Shank 3 0665199
Bearing Separator-Spread 1/2” – 8 5/8” 1 060095022