AP Installation
Access Point Deployment Guide
28
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
AP Mounting Details
Mounting options for the AP are discussed in this section. The AP is supplied with four
mounting tabs that facilitate attaching the AP to a wall, in a cabinet, or to a strut channel, if
required. The mounting tabs are attached to the AP by the installer using four provided, 5/16-
inch self-tapping, hex head bolts. See the mounting tabs shown in Figure 10.
Figure 10.
AP with Mounting Tabs Installed
AP Pipe Mount Option
We offer an optional pipe mount kit for the AP. This kit provided two 8-inch lengths of strut
channel that have been drilled to allow attachment to the top and bottom holes on the back of the
AP. The same self-tapping bolts provided with the AP are used to attach the strut channel in
place of the mounting tabs. After attaching the strut channel to the AP, it can now be attached to
any size of pipe using standard strut channel pipe clamps or conduit clamps.
