©1997-2016 Trikdis
9
www.trikdis.com
Radio receiver RFH11
7.
Select which service messages will be sent:
7.1.
Double click on the recording row in the table [Events]. Tick the checkbox [Active] if event code should be
sent. The recommended event codes are specified in Attachment A.
Settings in branch Settings:
8.
New frequencies may be entered or the existing ones deleted. Later these frequencies will be available in branch
Main.
9.
All settings can be saved by clicking [Save] button.
It can be used later as a template to configure other
modules
.
To open them click [Open] and indicate location. To exit program press [Exit].
