3.1 The Controls on the Front of the Unit
Prince
1
2
3
4
5
6
7
8
9
10
[ 1 ] Key OPEN
By pressing this key the inserted CD is ejected.
[ 2 ] Key << (title return and fast search return)
This key has two functions. The scanning laser jumps to the title beginning of the
momentary shown title by briefly pressing the key. The laser will be brought to the
previous title by pressing the key two times, provided the momentary shown title plays
longer than 2-3 sec. Long pressing of the key arranges the return search where the signal
can be listened to sequentially.
[ 3 ] Key >> (title jump forward and fast search advance)
This key has two functions. The scanning laser jumps to the next title by briefly pressing
the key. The advance search will be started by holding down the key, where the signal can
be listened to sequentially.
[ 4 ] Key START
If there is an audio-CD in the
PRINCE
, the CD player can be started by pressing this
key. By pressing the START-button during the rendering procedure the break function is
switched on and the display shows the word “
PAUSE
“. Pressing again on the start button
solves the break and the device is again in the run mode.
[ 5 ] Key STOP
If you want to break off the rendering procedure, you can do that by pressing the key
STOP.
[ 6 ] Key MODE
The four different time modes can be selected with this key. For further information see
number [ 9 ]. Long pressing switches off the
PRINCE
(Standby mode). By short pressing
of this key the CD player can be turned on again.
[ 7 ] LED Display Title Number
This display indicates the number of titles detected on the CD. Then the actual title
number is indicated. This display expires if total play time and total remainder play time
were shown in the indicator mode.
