[ 8, 9, 10 ]
MAIN POWER
[
8
] The mains voltage is switched on with this switch (standby).
[
9
] The mains fuses are located here.
[
10
] The enclosed power cord is connected to this socket.
[ 11 ]
COAX SPDIF Digital Output
A separate DA converter can be connected to this socket.
[ 12 ]
DIGITAL OUTPUT (Toslink)
If your digital-to-analog converter (DAC) or your amplifier has an optical SPDIF digital
input, you can use this socket with the help of a Toslink fiber optic cable for digital signal
transmission. Since the signals are transported here via an optical fiber, there is no
electrical connection between the DAC and the CD player, which can sometimes be
advantageous in order to avoid ground loops.
[ 13, 16 ]
R-CH, L-CH analog Output, asymmetrical
These analog outputs (R = right channel, L = left channel) are connected to the
corresponding inputs of the playback amplifier. As a rule, these inputs on the amplifier are
labeled CD, AUX or LINE-INPUT.
(Also note the operating instructions for your amplifier)
[ 14, 15 ]
R-CH, L-CH analog Output, symmetrical
Here is the unbalanced analog audio signal. Connect these sockets to an analog XLR
input of your playback amplifier.
(Also note the operating instructions for your amplifier)
4 Remote control
8