4
MODULES
The entire audio range of
Epilog
is built with modules. This way you can compose
your own ideas for preamplifier. Example, if you prefer a purely symmetrical
preamplifier, so you just use only symmetric input and output modules. You can also
freely mix, for example, or if you need a preamp with five outputs, this is also
feasible. As mentioned elsewhere, you must comply with only one condition: at least
one input module and output module must be used, otherwise denied the
Epilog
service. Currently we offer four different modules (see below). The concept of
Epilog
is so designed that we already have more of
TRIGON
modules in the
design and the fact
Epilog
with each new module is always interesting.
For this reason, we have the manual and designed so that you get when purchasing
a new module, a new chapter 4.x, you can then attach these instructions. For new
modules can be of troubles, replace the control software with a new software so that
the
Epilog
this new module can also operate. Therefore, is located on the back of
Epilog
an USB socket (
26
), which you can connect to a computer to update to the
latest "firmware" (software mode) in the
Epilog
. The software is provided free
download at our website for available.
4.1 UNBAL-INPUT module
UNBAL-INPUT
R
L
B
A
D ial o g
4.2 BAL-INPUT module
Die PIN-out:
The UNBAL-INPUT module has two single-ended stereo
inputs. Each input can be trimmed independently to
match the level of other sources/inputs to avoid large
jumps in volume when changing inputs.
BAL-INPUT
R
L
D ial o g
2
2
3
3
1
1
The INPUT BAL module is a balanced stereo line level
input. This input can be trimmed independently to match
the level of other sources/inputs to avoid large jumps in
volume when changing inputs.
