Triggertrap Flash Adapter Manual | Page 9
The flash keeps firing in quick succession and
ruining my photos
1.
First of all, check the settings on your flash unit.
Are you in manual mode? Make sure you have
turned off any presets that might allow your flash
unit to strobe like this.
2.
Check the threshold in the sensor mode you are
using in Triggertrap Mobile. Is the threshold set too
low, meaning that the sound level remains over the
threshold for too long?
3.
Go into Settings in Triggertrap Mobile and select a
Sensor Reset Delay of about five seconds.
4.
If none of the above seem to have helped, send us
an email on
The flash won’t fire at all!
1.
Turn on your flash and press the ‘test’ button -
does the flash go off?
2.
Do NOT use the Triggertrap Mobile Dongle
for this test: Connect your flash to the
Triggertrap Flash Adapter, and connect the cable
to the Flash Adapter. Now, please short-circuit
the side of the cable that you usually plug into
the Triggertrap Flash Adapter, using some
aluminium foil. Does that trigger the flash?
3.
Presuming step 1 and 2 resulted in your flash
triggering correctly - have you tried your dongle
with your camera? Does that work?
4.
If none of the above work, send us an email to
and we’ll help you out!
