2
PRELIMINARY:
TR-NIC Product Installation Document —
P/N LS10255-002TR-E:A 02/03/21
3.1 Setting the Device Address
To set the DIP switches to the desired address, add the values of the dip
switches in the “ON” position. Refer to Figure 3.
In Figure 3, the address setting in this example is 21. The Switches 1, 3,
and 5 correspond to the Address Values 1 + 4 + 16. If the Switches 1, 3,
and 5 are "ON", then the address setting is 21.
.
Figure 3 Setting the Device Address Example
.
O N