TT26 ADS-B Transponder Installation Manual
24 January 2017
01633-00
Issue AC
______________________
12
Trig Avionics Limited
5.3 Cooling Requirements
The TT26 ADS-B transponder meets all applicable ETSO requirements
without forced air-cooling.
Attention should however be given to the incorporation of cooling provisions
to limit the maximum operating temperature if the TT26 is installed in close
proximity to other avionics. The reliability of equipment operating in close
proximity in an avionics bay can be degraded if adequate cooling is not
provided.
5.4 TT26 Transponder Electrical Connections
The TT26 has a single 25 way male connector which provides the data and
power inputs to the transponder. A single TNC coaxial connector attaches to
the transponder antenna, and a single SMA connector attaches to the GPS
antenna.
