Adapting To Different Types of Gas
Before carrying out any maintenance work,disconnect the appliance from the gas and
electric supply.
To change the nozzles of burners use the following procedure:
Lift up the burners and unscrew the nozzles using an adjustable spanner of 7mm and
change the nozzles(Picture “J”) with those designed for the new gas supply according to
the information shown below.
ATTENTION:After carrying out the changes described above,the technician must put
the card corresponding to the new gas supply on the appliance to take the place.this
card is found in the bag containing spare nozzles.
Burner
Type of Gas
Pressure/mbar
Nozzle Diameter
1/100mm
Auxiliary
Natural 20
20
91
Butane 30
30
60
Semi-Rapid
Natural 20
20
116
Butane 30
30
76
Rapid
Natural 20
20
157
Butane 30
30
96
Triple-ring
Natural 20
20
168
Butane 30
30
Matters needing attention
A. Before installation,along the inside of the four edges of the hob, paste sponge
strips to buffer the friction between the hob and the cabinet panel.
B. Ignition:If there is no electric current you can light the burners with matches.
C. When cooking food with oil or fat which can easily set alight,the user must not
leave the appliance.Do not use sprays near the appliance when it is in use.When using
the burners make sure that the pan handles are in the correct position.
D. Keep children away.
E. Before carrying out any cleaning operation disconnect the appliance from the
electric mains and turn off the main tap which supplies the appliance with gas.
F. Choose the right pan size:
G. Choose flat pan:
H. Cleaning the worktop:periodically the burner heads,enamelled steel
grills,enamelled lids and flame dividers must be cleaned with warm soapy water,rinsed
and dried well.
I. Any liquid which overflows from the pan must always be removed with a cloth.
J. If opening or closing any tap is difficult do not force if but ask for an urgent check
from the technical assistant.
