4
electrical shock.
Before you move your refrigerator into its final location, it is important
to make sure you have the proper electrical connection.
Recommended Earthing Method
A 230 Volt /50 Hz AC only 10 ampere fused and properly earthed
electrical supply is required. It is recommended that a separate circuit
serving only this appliance be provided. Use a receptacle which
cannot be turned off with a switch or pull chain. Do not use an
extension cord.
NOTE:
Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator control to OFF and then
disconnect the refrigerator from the electrical source. When you are
finished, connect the refrigerator to the electrical source and reset the
control to the desired setting.
LEVELING
If the refrigerator is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It
is very important of the refrigerator to be level in order to function
properly.
To level your refrigerator, you may either turn the level leg clockwise
to raise that side to the refrigerator or turn counter
– clockwise to
lower that side.
NOTE:
Having someone push against the top of the refrigerator take
some weight off the leveling leg. This makes it easier to adjust the
leveling leg
.
