4
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in death, fire or electrical
shock.
Before you move your refrigerator into its final location, it is important
to make sure you have the proper electrical connection.
Recommended Earthing Method
A 220
～
240 Volt /50 Hz AC only 10 ampere fused and properly
earthed electrical supply is required. It is recommended that a
separate circuit serving only this appliance be provided. Use a
receptacle which cannot be turned off with a switch or pull chain. Do
not use an extension cord.
NOTE:
Before performing any type of installation, disconnect the
fridge from the electrical source. When you are finished, connect the
fridge to the electrical source and reset the control to the desired setting.
LEVELING
If the fridge is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It
is very important of the fridge to be level in order to function properly.
To level your fridge you may either turn the level leg clockwise to
raise that side to the fridge or turn counter
– clockwise to lower that
side.
NOTE:
Having someone push against the top of the fridge take some
weight off the leveling leg. This makes it easier to adjust the leveling
leg
.
USE OF THE APPLIANCE
To obtain the best possible results form your refrigerator, it is important
