www.tridonic.com
4
Subject to change without notice. Information provided without guarantee.
Data sheet 12/19-CO106-5
basicDIM Wireless
Casambi Ready
2.1 Description
The basicDIM Wireless PWM CV 4CH module is a Bluetooth controlled,
four channel PWM dimmer for constant voltage LED loads, such as LED
strips and constant voltage LED modules.
The basicDIM Wireless PWM CV 4CH is supplied with 12-24 V DC.
The LED load is connected to the output.
The basicDIM Wireless PWM CV 4CH module can control up to four
channels, making it an ideal partner for RGBW and Tunable White (TW)
applications. The maximum combined output current is 6 A, which can be
freely divided into 1-4 channels.
All basicDIM wireless devices can be controlled with the Tridonic app
„4remote BT“. The app can be downloaded for free from the Apple App Store
or Google Play Store.
2.2 Operation
The basicDIM Wireless PWM CV 4CH module is fully compatible with
networks which support up to 250 nodes (Evolution networks). If the module
is used with different types of basicDIM Wireless devices in an Evolution
network, their compatiblity has to checked before. If a device is not
compatible with Evolution networks, it can be only used in networks which
support up to max. of 127 devices (Classic networks).
Multiple devices automatically form a mesh network that can be controlled
from any point. These networks communicate wirelessly directly with the
smartphone or tablet. Therefore, an external gateway or wireless LAN
network is not required.
basicDIM wireless devices have an integrated 2.4 GHz antenna. For optimum
RF performance, special attention is required if the device is to be integrated
into a luminaire. See also chapter 5.4 Placement for further instructions.
The settings and operating modes can be configured using the 4remote BT
app. They are automatically stored in the Tridonic Cloud Service. This way,
the same settings are available to everyone connected to the network.
1.1 Glow wire test
according to EN 61347-2-11 with increased temperature of 850 °C passed.
Expected life-time
Type
ta
50 °C
basicDIM Wireless PWM CV 4CH
tc
75 °C
Life-time
100,000 h
The device is designed for a life-time stated above under reference
conditions and with a failure probability of less than 10 %.
2. Common
3. Thermal details and life-time
3.1 Expected life-time
4. Interfaces / communication
7
15
15
tc (bottom)
The basicDIM Wireless PWM CV 4CH module has a common positive output
connector (+) and each of the four channels has its own negative connector
(-). This is the most typical case with multi-channel LED strips.
Connect the LED load cables accordingly.
The outputs of the basicDIM Wireless PWM CV 4CH can be configured for
different applications, such as 4-channel RGBW, 3-channel RGB and
2-channel TW. It is also possible to configure the individual dimmable
channels together and individually. These configurations can be made by
the end user from the Tridonic 4Remote BT App.
1. Standards
EN 55022
EN 55032
EN 61000-4-2
EN 61000-4-3/A2
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-29
EN 61347-1
EN 61347-2-11
EN 61347-2-13
FCC 47CFR Part 15 Class B Sub part C
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
