Tridonic 28003535 Manual Download Page 1

Page: 1 / 10

www.tridonic.com

Subject to change without notice. Information provided without guarantee.

Data sheet 10/21-LC896-1

LED Driver

Constant voltage

Product description

• NEW: lumDATA (Luminaire data, Energy reporting and

Diagnostics & Maintenance)

• Dimmable 48 V constant voltage LED Driver for flexible constant

voltage strips

• Can be either used built-in or independent with clip-on

strain-relief

• One4all interface enables different dimming options

• Dimming range 1 to 100 %

• No additional external dimmer is needed

• Suitable for emergency escape lighting systems acc. to EN 50172

• Nominal lifetime up to 100,000 h

• 5 years guarantee (conditions at www.tridonic.com)

Typical application

• Cove lighting, facade accent lighting, ceiling integration

Technical details

• 48 V, 100 W

• Small cross section

• Push terminal for simple wiring

Interfaces

• Near field communication (NFC)

• one4all (DALI-2, DSI, switchDIM, corridorFUNCTION)

• Terminal blocks: 45° push terminals

System solution

• Tridonic LLE FLEX 8 mm 48V EXC 600, 1,200, 1,800, 2,500 lm/m

• Tridonic LLE FLEX 12 mm 48V EXC 3,000, 4,000 lm/m

•

Standards

, page 3

Driver LC 100W 48V one4all NF SC EXC

excite series

48 V – dimmable (IP20)

Summary of Contents for 28003535











Search results

Summary of Contents for 28003535

Reviews:

Related manuals for 28003535

Brands by name

Popular brands

Tridonic 28003535, Manual

Search results

Summary of Contents for 28003535

Reviews:

Related manuals for 28003535

Brands by name

Popular brands