Trident Model PD765 Universal Input Meter Instruction Manual
50
Entering the correct four-digit number sets the password to 0000, disa-
bling the protection.
Changes to the programmed parameter settings are allowed only with
the password set to 0000.
If the password entered is incorrect, the meter displays
LoCd
(Locked)
for about two seconds, then it returns to Run Mode. To try again, press
Enter/Ack
while the
Locked
message is displayed.
Forgot the Password?
The password may be disabled by the following
procedure:
1.
Note display reading prior to pressing the Menu
button. Ignore decimal point and sign.
2. Access
the
Password
menu, add 2 to the noted
reading and enter that number as the password
(e.g. display reading = -1.23, password = 0125).
Advanced Features Menu
To simplify the setup process, functions not needed for most applica-
tions are located in the
Advanced
Features
menu.
Press the
Right
arrow and
Menu
button simultaneously or hold the
Menu button for approximately 3 seconds to access the
Advanced
Fea-
tures Menu
of the meter.
Copy
I Cal
Press
Enter/Ack
to Access
Menu or to Accept Setting
diag
byps
fltr
serl
Press
Up
to Scroll Menu and
to Increment Digit Value
Press
Right
to Select Next Digit
Press
Menu
to Exit at any Time
adj
Press Simultaneously
*
* Available for temperature inputs only
**
* * Available for process inputs only
SELc
www.
GlobalTestSupply
.com
Find Quality Products Online at:
