5
Daylight Saving adjustments occur on a Sunday. From Sunday
through Tuesday, the clock will show a “DST check mark” icon
next to the time to remind employees that the DST correction
has taken place.
The timekeeping website automatically performs adjustments to
ensure everything is correct. There should rarely, if ever, be a need
to adjust time cards - even if employees worked overnight during
the time change.
If you live in an area that does not observe Daylight Saving Time
(such as Arizona), then the automatic adjustment is disabled by
your payroll provider from the web site.
Using the Clock
CLOCKING IN & OUT
Clocking in and out is simple: Press (1) to clock in, press (2) to
clock out.
After you press (1) or (2), enter your PIN number, or swipe your card.
Additional prompts (such as “department”, “job”, or “tip” prompts)
may appear. These are configured from the timekeeping web site.
4 and 5 keys (optional)
The (4) and (5) keys can also be used to clock “in” and “out”, if
enabled from the web site. This allows an alternate set of prompts
to be shown to certain employees. This feature is commonly used at
restaurants. For example, non-tipped employees may use these keys
to bypass a prompt that asks “enter total tips.” Contact your service
provider for more information.