TriContinent C24000, Product Manual

Page: 77 / 144

Using EEPROM
77
C-Series Product Manual
AutoRun a stored string (standalone pump operation)
On power-up, if the AutoRun jumper is installed on the back of the pump,
the string corresponding to the rotary address switch position will be auto-
matically executed.
Example:
• The following strings store programs into EEPROM locations 0 and 1:
[s0ZIP1000H0OD1000R]
[s1ZIP500H0OD500R]
• The AutoRun jumper is installed on the back of the pump.
• At power-up:
–
If the rotary address switch on the back of the pump is set to 0, [s0] will
run automatically.
–
If the rotary switch is set to 1, [s1] will run automatically.
Note: An initialization command is required in a stored command string
intended for standalone (AutoRun) use.
Table 5-8 shows the relationship between the strings stored with [s<n>] and
the address switch settings.
Table 5-8: Address switch setting vs. stored strings for AutoRun
Address switch setting with
AutoRun jumper installed
Stored string referenced (memory location)
0 s0 (string stored in memory location 0, and so forth)
1 s1
2 s2
3 s3
4 s4
5 s5
6 s6
7 s7
8 s8
9 s9
A s10
B s11
C s12
D s13
E s14