Tricolor Multi-Viewer, User Manual

Page: 8 / 9

- 4 -
monitor with HDMI cable for input source display.The UTP port
connect to CAT Receiver by CAT5e/6 cable for signal
extend.The Coax is where you connect to the amplifier with
coaxial cable.
3)
IR RX:
Connect to the IR Receiver for IR signal reception.
Ensure that remote being used is within the direct line-of-sight
of the IR receiver.
4)
IR TX:
Connect the IR Blaster cable included in the package for
IR signal transmission. Pace the IR blaster in direct line-of-sight
of the equipment to be controlled.
5)
RS232:
Connect the RS232 port to the PC or notebook by
Rs232
Cable.
6)
DC 12V:
Plug the 12V DC power supply into the unit and
connect the adaptor to AC wall outlet.
5. Connection Diagram