Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114
Trico‐Lighting http://www.trico‐lighting.com/
Put the PAR56 lamp body inside the housing, lock the screws on the surface and then you finish
Installation Remarks
Completely shut off the power when installing or replacing lamp
The light should be installed no deeper than 500mm underwater
Lighting test should be done underwater, if above water, make sure it won’t last over 10 minutes or there will be
function problem or the light may be damaged
Make sure the wires are connected correctly and extra waterproofing work need to be done if the joint is underwater.
