1
Lay out the leg assemblies and six of the shorter
rungs (C) roughly as above. Place the legs with
the larger holes facing inwards.
Items required:
Bx6
Cx2
2
Insert rungs into recessed holes on one side.
Insert flat head screws (D) and tighten using the
hex key provided.
Items required:
Dx6
3
Repeat Step 2 on the opposite side.
Items required: Dx6
4
Using the remaining rungs, repeat step 2.
Items required: Dx6
5
Repeat step 3 on the opposite side.
Items required: Dx6
Ensure all rungs are securely inserted into
leg recesses and that flat head screws (D)
are screwed tightly and flush against the
legs. All screws should be tight and rungs
should not be able to move or turn.
Tightening the screws requires significant
strength.
6
7
Open the Triclimb frame and stand it up.
The frame may rock slightly, which is
normal. Place your hands at the top of the A
frame and press down firmly. This will help
to square up the frame. You may need to
rock the frame back and forth a few times
while applying downward pressure on the
frame to ensure the ends of all four legs sit
flat on the floor and that the unit does not
rock when the pressure is released.