TrickleStar TS2301, User Manual

Page: 54 / 63

54
power
connectivity
load
Factory Reset
If you need to reset your Water Heater Controller to factory default settings, please do the following:
1. Press and hold the power button for at least 30 seconds until the "connectivity" indicator flashes in
red/green/blue.
2. Go to Portal, select the Water Heater Controller and click “Delete”.
3. Click “Add New + “ to add your Water Heater Controller. Then, follow the instruction guide.
All settings will be deleted and the Water Heater Controller will reset to factory default settings.
Wi-Fi Network Reset
If you have changed to or added a new network, and you want to reset your Wi-Fi network for the
Water Heater Controller, perform a Wi-Fi Network Reset.
At the Portal, select: Devices -> Device Name -> Settings -> Device Info icon -> Connected Network
(SSID) -> Configure.
Follow the steps to reset your Wi-Fi network for the Water Heater Controller and reconnect your
Water Heater Controller to the Portal.
Maintenance
Fig 54-A