manualshive.com logo in svg

TrickleStar TS1914, Quick Start Manual/Instruction Manual

Share
Download
TrickleStar TS1914 Quick Start Manual/Instruction Manual Download Page 4

www.tricklestar.com

TAV Link

TM

 Multi-Sensor

 

 

 

TAV-LINK

-

*

Game consoles without hard disk drives (HDD) should be plugged into a 

switched outlet. CEC compatible game consoles with hard disk drives 

can be plugged into an always-on outlet and controlled via TAV-Link.

*

IR REMOTE

CONTROL

MOTION

TAV LINK

TM

MULTI-SENSOR

TAV Link

TM

Multi-Sensor

(for CEC function)

always on

switched

tv/control

To configure the countdown timer, press and hold 

the button for 10 seconds until the red LED 

illuminates. Then press:

•  Once for 30 minutes (IR + motion  sensing)

•  Twice for 60 minutes (IR + motion sensing)

•  Three times for 120 minutes (IR + motion           

 sensing) 

•  Four times for 60 minutes (IR sensing only)

•  Five times for 120 minutes (IR sensing only)

LED will flash once for 30 minutes, twice for 60 

minutes (default setting), three times for 120 

minutes, four times for 60 minutes (IR sensing only) 

and five times for 120 minutes (IR sensing only).

Programming the 

Countdown Timer

Installation Diagram

(12 Outlet Advanced PowerStrip)

Summary of Contents for TS1914









Reviews:

No comments

Brands by name

Popular brands

Load more brands