Trickfish Amplification BULLHEAD MINI 500, Operation Manual

Page: 5 / 12

• Read these instructions.
• Keep these instructions
• Heed all warnings.
• Follow the instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
• Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus that produce heat.
• Do not defeat the safety purpose of the
grounding type plug. A grounding type plug
has two blades and a third grounding prong
and is used for your safety.
• Protect the power cable from being walked
on or pinched particularly at the plugs or at the
point where they exit the device.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
• Object and Liquid entry: Never push any
foreign objects of any kind into the openings as
they may touch dangerous voltage points that
could result in fire or electric shock. The
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids
such as a beverage shall be placed on top.
• When the apparatus exhibits a distinct change
in performance this indicates a need for
service.
• There are NO USER SERVICABLE PARTS
• Refer servicing to all qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as the power cable has been damaged or liquid
has been spilled or objects have fallen into the
apparatus or the apparatus has been exposed
to rain or moisture, does not operate normally
or has been dropped.
•
Damage requiring service: Unplug the
apparatus from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a) When the power supply cord has been
damaged.
b) If liquid has been spilled, or objects have
fallen into the apparatus.
c) If the apparatus has been exposed to rain or
moisture.
d) If the apparatus does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the
apparatus to its normal operation.
e) If the apparatus has been dropped or
damaged.
•
Connecting: When you connect the amplifier
unit to other equipment, turn off the power
and unplug all of the equipment from the
supply source. Failure to do so may cause an
electric shock and serious personal injury.
Read the user manual of the other equipment
carefully and follow the instructions when
making the connections.
•
Sound Volume: Reduce the volume to
minimum before you turn on the amplifier to
prevent sudden high levels of noise which may
cause hearing or speaker damage.
•
Speakon connectors: WARNING: Speakon
connectors marked with the lightning flashes
indicate high voltages that are potentially life
threatening. Wiring to these terminals requires
installation by an instructed person and the use
of ready made leads or cords.
•
Custom wiring should only be carried out by
qualified personnel.
•
To prevent electric shock, do not operate the
product with any of the conductor portion of
the speaker wire exposed.
•
NOTE: For reasons of safety and performance,
use only high quality fully insulated speaker
cables of stranded copper wire. Use the largest
wire size that is economically and physically
practical, and make sure the cables are no
longer than necessary.
Important Safety Instructions