background image

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or
lime spots on the dishes after washing.

Reduce the dose if there are whitish streaks on
the dishes or a bluish film on glassware or knife
blades.

Open the lid.

Set the dosage level. (The
dose is factory set in po-
sition 4).

Close the lid and press un-
til it locks.

Loading cutlery and dishes

Sponges, household cloths and any object that
can absorb water may not be washed in the
dishwasher.
• Before loading the dishes, you should:

– Remove all left over food and debris.
– Soften remnants of burnt food in pans

• When loading the dishes and cutlery, please

note:
– Dishes and cutlery must not impede the

rotation of the spray arms.

– Load hollow items such as cups, glasses,

pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.

– Dishes and items of cutlery must not lie

inside one another, or cover each other.

– To avoid damage to glasses, they must

not touch.

– Lay small objects in the cutlery basket.

• Plastic items and pans with non stick coat-

ings have a tendency to retain water drops;
these items will not dry as well as porcelain
and steel items.

• Light items (plastic bowls etc.) must be loa-

ded in the upper basket and arranged so
they do not move.

 

11

Summary of Contents for TDF222

























Reviews: