CLEANING
Replace the jug on the base. Pour about 500ml of warm soapy water into the jug.
Replace the lid. Do not insert the stirrer.
Turn and the Selector knob to ‘0’ . Press the knob to set the blender into pulse
mode for a few seconds to loosen any food particles and free them from the blade.
Remove the jug, from the motor unit, pour away the water and rinse in fresh
running water.
Unscrew the jar base from the jug.
Take the blade assembly out and disassemble it. Avoid touching the blade edges.
Detach the stopper from the jar cover. Rinse the jar, blade, jar base, jar cover, stirrer
and stopper under running water.Wash the lid and stopper separately in warm
soapy water, rinse and allow to dry.
DO NOT wash the jug or attachments in a dishwasher.
Cleaning the motor base:
Ensure the liquidiser is unplugged from the mains.
Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive
cleaners or scouring creams.
Never immerse the motor base in water when cleaning.
After cleaning:
After all the components have been
washed and dried, re-assemble the
blade unit.
Locate the blade on the three lugs in
the base, place the rubber seal oaer
the blade as shown and attach the
base to the jug.
STORAGE
After all the components have been washed and dried, re-assemble the liquidiser
and stow it out of direct sunlight and out of the reach of children.
The cable may be wound inside the cavity under the appliance for easier stowage.
Cleaning and Care
7
