background image

23

SERVICE AND SPARE PARTS

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local 
Service Force Centre by telephoning:- 

0870 5 929929 

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. 

For the address of your local Service Force Centre and further information about Service Force, please visit the 
website at www.serviceforce.co.uk. 

Before calling out an engineer, please ensure you have read the details under the heading "Something Not 
Working?". 

When you contact the Service Force Centre you will need to give the following details: 
1.  Your name, address and post code. 
2.  Your telephone number. 
3.  Clear and concise details of the fault. 
4.  The model and serial number of the appliance (found on the rating plate). 
5.  The purchase date. 

Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service 
calls.

For Customer Service in Ireland please contact us at the address below: 

Tricity Bendix 
Electrolux Group (Irl) Ltd 
Long Mile Road 
Dublin 12 
Republic of Ireland 

Tel: +353 (0) 1 4090752 

Email:

[email protected]

CUSTOMER CARE DEPARTMENT 

For general enquires concerning your Tricity Bendix appliance, or for further information on Tricity Bendix products, 
please contact our Customer Care Department by letter or telephone at the address below;  

Customer Care Department 
Tricity Bendix 

Major Appliances 

Addington Way 
Luton
Bedfordshire 
LU4 9QQ 

Tel: 0870 5 950950 (*) 

*calls to this number may be recorded for training purposes. 

Summary of Contents for TBC 651 X

























Reviews: