Tricity Bendix TB 51 RS, Operating & Installation, Page: 4 / 20

OPERATION
Before use
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator and the
-star compartment is regulated by a thermostat
with 6 temperature positions and one «OFF» (O)
position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l
Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
When altering the temperature setting, allow 24 hours
for the temperature to stablise before making further
changes.
4
DESCRIPTION OF THE APPLIANCE
➀
Dairy compartment with egg
tray
➁
Can storage shelf
➂
Bottle storage shelf
➃
Salad bin
➄
Glass shelf (for storing fresh
meat)
➅
Storage shelves
➆
Thermostat control
➇
Freezer compartment
➈
Conveyor
➀
➁
➂
➃
➄
➅
➈
➆
➇
Important
The temperature inside the refrigerator and
-star compartment can be regulated by
adjusting the conveyor located under the
-star compartment.
To obtain a lower temperature in the -star
compartment when frozen food is stored inside
and when the ambient temperature is 25°C or
lower slightly raise the conveyor (A) and push it
all the way in. When frozen food is not stored in
the
-star compartment and when the
ambient temperature is higher than 25°C return
the conveyor to its initial position. This reduces
the temperature in the refrigerator
compartment.
D182
A
**