Operat
ion
Advanced Procedures
SETTING THE USER PRESETS
TIME-DELAYED STEAMING
WHEN YOU HAVE FINISHED
You can set a cooking programme in the steamer and than delay
To prevent foods from being overcooked, remove the steamer
1:
Plug the steamer in and switch on at the mains.
the start time by up to 23hours 55min This is useful if you are
bowl immediately, using a cloth or oven gloves and place it on a
2:
Press and hold the
Mode
button
preparing food to be ready at a given time, perhaps as a course
plate or on the reversed lid.
The
Preset 1screen
will flash
towards the end of a meal.
$
If you have placed any food utensil in a steamer bowl, remove
3:
Press the
(+/–)
buttons to select the preferred steaming time
Example:
Steam food for 50 min. after a delay of 20 minutes.
it carefully, holding it by the sides. If necessary use a kitchen
You can set up to 99 minutes.
1:
Switch the steamer on
implement long enough for this.
4:
To store the preset time, press
START/STOP
$
After use, unplug the appliance and allow it to cool
The preset stops flashing and the time is set.
2:
Press the Timer button.
completely before emptying the water basin
. Make sure the
To select Preset 2:
appliance cannot inadvertently be knocked over while the
The time display deploys
1:
Plug the steamer in and switch on at the mains.
water cools.
3:
Set the time delay
(20min)
2:
Press and hold the
Mode
button
$
Do not leave the appliance plugged in longer than necessary.
Each press moves the time 5 mins.
The
Preset 1 screen
will flash
$
3:
Press
the
Mode
button
again
4:
P
r
ess
START/STOP
The
Preset 2 Screen
will now flash
You can now set a steaming time as above.
The main screen deploys
Note 1:
Preset times are retained even when the steamer is
disconnected from the mains and stored for a period of time.
5:
Set the steaming time
Note 2:
Repeat the procedure to change the preset time
(50 minutes)
Note 3:
To set a time for Preset 2 it is necessary to plug the
steamer in and then follow the above procedure. Preset 1 can be
altered without unplugging the unit.
6:
Press
START/STOP
The screen will display the waiting time
and the clock will count down in
minutes.
When the time has elapsed the steamer
will start. normally.
When steaming is complete:
The steamer will beep twice and
THE KEEP WARM FUNCTION
the steamer will go to ‘KEEP WARM’ state. The steamer will then
The flavour and nutritional value of steamed food is best when
switch off after 20 minutes.
freshly cooked. However, should you wish to keep food warm for
!
To cancel a time delay program, press the
Timer
button.
a short period of time, you can select “KEEP WARM” by pressing
!
Press the
ON/OFF
button to switch the steamer off.
the “MODE” button and if necessary adjust the time.
!
You can use the time delay procedure with the standard and
User Presets and even time delay if you wish.
Empty the water basin and change the water after each use.
USEFUL HINTS AND TIPS
USING MORE THAN ONE STEAMER BOWL
Always place the largest pieces or food with the longest cooking
time in the lowest bowl. You may place different foods in the
bowls, but as condensation will drip from the topmost bowl be
sure the flavours complement each other.
When steaming meat or poultry with vegetables, place the meat
or poultry in the lower bowl so juices from raw or partially cooked
meat cannot drip onto other foods.
Steaming times for food in the upper bowls usually take longer so
allow an extra few minutes.
If foods with different cooking times are being steamed, start
steaming with the food with the longest cooking time in the
lower bowl . When the remaining steaming time reaches that of
the food with the shorter cooking time, carefully remove the lid
with oven gloves and place the next bowl on top. Cover with the
lid and continue steaming.
:
P 00
i
:
P 99
i
:
P 99
i
:
P2 00
1
2
00 20
3
50
5
6
00 20
